Installation guide

Configuring digital trunks and channels 5-26
Chapter 5: Configuring Analog and Digital Trunks
Wave Global Administrator Guide
• NPI Name. A text string describing the Numbering Plan Identifier; typically E.164,
Unknown, or Private.
•
TON #. Type of Number. There can only be four different types of entries:
•
0 = unknown.
•
1 = international number.
•
2 = national number.
•
4 = subscriber number.
•
TON Name. A text string describing the Type of Number; typically National,
International, or Unknown.
•
Service/Feature. Service vs. Feature. Typically left N/A unless the provider states that
it should be either Service or Feature.
• If you select Service or Feature, you need to configure the next three settings:
BFCV #. Binary Facility Coding Value, 0 through 31.
A number for the service must be entered in the BFCV field. The provider provides
this number. The number can be from 0 through 31.
Some common Service IDs:
•
1 = SDN (including GSDN) = in/out.
•
2 = Toll free MEGACOM= in.
•
3 = MEGACOM = out.
•
6 = ACCUNET Switched Digital Service = in/out.
•
7 = Long Distance Service = in/out.
•
8 = International Toll Free Service = in.
•
10 = ATT MultiQuest = in.
•
17 = Call Redirection Service = in.
BFCV Name. A text string describing the BFCV value.
SID #. Service Identifier, 0 through 127. Used primarily by Bell Canada.
If you are not sure of your changes, click
Restore System Defaults to restore your
changes to the system defaults.
Release 2.0
September 2010