Installation guide

Configuring digital trunks and channels 5-25
Chapter 5: Configuring Analog and Digital Trunks
Wave Global Administrator Guide
b Click Service Code Table to modify the service code table for the switch variant that
you specified in the previous step.
Note: You do not need to modify the service code table during initial configuration.
The defaults should be sufficient for connecting to a local exchange carrier.
c If your ISDN trunks support multiple services, click
Add to add new service name
records to the service code table, then modify the new records by clicking in each
field to open a text field or a drop-down list.
Note: The new entries in the service code table appear as ISDN Setting options in the
outbound routing tables. You will configure the outbound routing tables in
“Configuring outbound routing tables” on page 9-20. You can select these settings on
a call-by-call basis.
You can modify the following fields for new entries and existing entries:
•
Service Name. A text string, such as OUTWATS, FX, TIE, VNET
•
NPI #. Numbering Plan Identifier, 0 through 15.
•
0 = unknown, the network has no knowledge of the numbering plan so it uses the
NANP.
•
1 = ISDN/telephony number plan. Enter the name E.164 in the NPI Name field.
•
9 = private numbering plan (private network).
Release 2.0
September 2010