Installation guide

Creating a new trunk group 5-8
Chapter 5: Configuring Analog and Digital Trunks
Wave Global Administrator Guide
9 If you selected Enable Outside Line functionality to create an outside line-enabled trunk
group, click the Outside Line Properties tab.
10 Specify the
Variant, one of two ways in which outside line buttons on digital phones will be
associated with the trunks in this trunk group:
•
Single Call. Select this option (the default) to associate each outside line with a single
trunk. If lit, the light next to the outside line button on a user’s digital phone indicates
if the trunk is in use by any phone.
•
Multiple Call. Select this option to associate each outside line with multiple trunks. If
lit, the light next to the outside line button on a user’s digital phone indicates if all of
the associated trunks are in use.
Warning: Once you select a Variant and click Apply or Done in this dialog, if you want
to change the variant you must first deselect the
Enable Outside Line functionality
checkbox, click
Apply, make the change, and then re-select Enable Outside Line
functionality
.
For more about Single Call and Multiple Call variants, see “Outside lines” on page 29-25.
Release 2.0
September 2010