Installation guide

WaveNet port usage E-3
Appendix E: Wave Port Usage
Wave Global Administrator Guide
Aastra SIP port usage
This section describes SIP ports usage with Aastra SIP phones.
WaveNet port usage
This section describes the port used by Microsoft Message Queue (MSMQ) to communicate
between
WaveNet nodes. For more about planning for, configuring, and using WaveNet, see
Chapter 25.
Receive on... Transmit to...
RTP Voice Transport
RTP UDP/dynamic (16384 - 18384) - not
configurable
UDP/Dependant on other endpoint
RTCP UDP/dynamic (16385 - 16835) - not
configurable
UDP/Dependant on other endpoint
SIP Transport
5060 - configurable to 5061 5060, 5061
UDP 65000 (used for music on hold)
Port Type Receive On Transmit On Configurable Notes
SIP 5060 5060 Default port for SIP signaling.
RTP UDP (3000) UDP (3000) Default port for RTP audio.
RTCP UDP (3001) UDP (3001) Default port for RTCP.
TFTP UDP (69) UDP (69) Port for requesting and downloading configuration
file from the Wave Server.
Port Type Receive On Transmit On Configurable Notes
TCP TCP 1801 TCP 80 Used if you select the
TCP Communication Method
when you add a Wave Server to a WaveNet
network.
Note:
Release 2.0
September 2010