System information

J-48 INSTALLING TELEVANTAGE
Server\UseGroupMemberDNDSetting
Specifies whether workgroup calls to an Available user with a shared station ring the
phone if the phone's other user is in Do Not Disturb (DND) status.
If set to Off (the default behavior that matches previous versions), whether or not the
phone rings depends on which user is currently logged in to the station. If a user is
taking calls and is logged in to the station, the phone rings. If a user is in DND and is
logged in, the phone does not ring. (For an explanation of logging in to stations, see
Chapter 7 of Using TeleVantage.)
If set to
1 (On), the phone rings regardless of which user is currently logged in.
Default value is
0 (Off.)
Server\VoxLowEventInterval
Minimum Time interval in milliseconds for generating Event logs when a low priority
voice resource cannot be allocated. A low priority voice resource is a voice resource
used for setting MWI and paging.
Default value is
-1 (Ignore setting.)
Server\VoxLowBorrowedMinFreeAbsolute
The minimum number of borrowed voice resources the system leaves for other purposes
before allocating a borrowed voice resource for a low priority task. A low priority task
is an MWI or paging task.
Note: This setting overrides VoxLowBorrowedMinFreePercentage.
Default value is
-1 (Equivalent to the number of borrowed voice resources—don’t
allocate any borrowed voice resources.)
Server\VoxLowBorrowedMinFreePercentage
The minimum percentage of borrowed voice resources the system leaves for other
purposes before allocating a borrowed voice resource for a low priority task. A low
priority task is an MWI or paging task.
Note: This setting is overridden by VoxLowBorrowedMinFreeAbsolute unless that
setting is
-1.
Default value is
-1 (Equivalent to 100%—don't allocate any borrowed voice resources.)
Server\VoxLowSharedMinFreeAbsolute
The minimum number of shared voice resources the system leaves for other purposes
before allocating a shared voice resource for a low priority task. A low priority task is
an MWI or paging task.
When set to
-1, the system uses the following table for the value of this setting:
System database settings