System information

APPENDIX J. TELEVANTAGE CONFIGURATION SETTINGS J-43
Server\IPVoiceTitleMaxSilence
Sometimes voice titles for IP calls are cut off. This is because latency causes extra
silence at the start of the call. This setting allows you to change the Maximum duration
of silence allowed in milliseconds.
Default is
2000
Server\LongIdleTime
DWORD value that specifies the minimum duration (in seconds) of a function call or
IVR Plug-in before a Windows event is generated.
Default value is
21600 seconds.
Server\MaxAutoAttendantLoops
DWORD value that specifies the maximum number of auto attendants to which a call
will be routed without the caller pressing a key.
Default value is
3.
Server\MaxGreetingDuration
The maximum length (in minutes) of a single greeting recording.
Default is
5 minutes.
Server\MaxRingDuration
DWORD value that specifies the maximum ring duration (in milliseconds) for internal
and external calls. The maximium possible value is
999000. Note that for live Operator
systems you might want to use the maximum value, to help prevent Operator calls from
continuing down the Operator’s routing list.
Default value is
120000 milliseconds.
Server\MinimumMessage
DWORD value that specifies the minimum duration (in milliseconds) for voicemail
messages. Messages shorter than this are discarded.
Default value is
2000 milliseconds.)
Server\MinRingDuration
DWORD value that specifies the minimum ring duration (in milliseconds) for internal
and external calls. The minimum possible value is 1000.
Default value is
5000 milliseconds.
Server\MinRingDurationForExternal
DWORD value that specifies the minimum ring duration (in milliseconds) for external
calls.
Default value is
12000 milliseconds.
System database settings