System information

J-42 INSTALLING TELEVANTAGE
Server\ExternalCallOfferingDelay
DWORD value specifying the wait (in milliseconds) before TeleVantage starts call
offering on a trunk for routing lists and call forwarding. This setting applies to normal
PSTN calls (analog, RB T1, and ISDN.) For IP calls where a positive indication of
connection is received, use
ExternalCallOfferingDelayConnected.
Default is 8000 milliseconds.
Server\ExternalCallOfferingDelayConnected
DWORD value specifying the wait (in milliseconds) before TeleVantage starts call
offering on a trunk for routing lists and call forwarding. This setting applies to IP calls
where a positive indication of connection is received. For normal PSTN calls (analog,
RB T1, and ISDN), use
ExternalCallOfferingDelay.
Default is
100 milliseconds.
Server\HoldRecallBehaviorForParkedCalls
DWORD value specifying the system-wide behavior when a ringback calls is answered
(ringback calls are calls left on hold or parked that ring the user back.) When set to
0,
the system announces the call. When set to
1, the call is immediately connected.
Default is
0.
Server\InternalDialtoneTrunkFirsttimeout
DWORD value that specifies the dial tone duration (in milliseconds) before the trunk
goes to reorder when a user is logged in remotely.
Default value is
180000 milliseconds.
Server\InternalDialtoneTrunkSecondtimeout
DWORD value that specifies the dial tone duration (in milliseconds) after a remote
party hangs up before the station goes to reorder when a user is logged in remotely.
Default value is
180000 milliseconds.
Server\InternalDialtoneStationFirsttimeout
DWORD value that specifies the dial tone duration (in milliseconds) before the station
goes to reorder.
Default value is
25000 milliseconds.
Server\InternalDialtoneStationSecondtimeout
DWORD value that specifies the dial tone duration (in milliseconds) after a remote
party hangs up before the station goes to reorder. If there is a PBX behind TeleVantage
that uses the reorder tone as a disconnect tone, you may want to decrease this value.
Default value is
5000 milliseconds.
System database settings