System information

APPENDIX J. TELEVANTAGE CONFIGURATION SETTINGS J-27
DXBD_P_IDD 10
0
Pulse Interdigit Delay.
Time between digits in pulse
dialing. (10ms units.)
DXBD_P_MK 4
Pulse Dial Make.
Duration of pulse dial off-hook interval.
(10ms units.)
DXBD_R_EDGE 2
Ring Edge.
Detection of ring edge:
1- Beginning of ring
2 - End of ring
DXBD_R_IRD 80
Inter-ring Delay.
Maximum time to wait for the next ring
(100ms units.) Distinguishes between calls. Set to 1 for T-1.
DXBD_R_OFF 5
Ring-off interval.
Minimum time for ring not to be present
before qualifying as “not ringing” (100 ms units.)
DXBD_R_ON 3
Ring-on Interval.
Minimum time ring must be present to
qualify as a ring (100ms units.)
DXBD_S_BNC 4
Silence and Non-silence Debounce.
Length of a changed
state before Call Status Transition message is generated.
(10ms units.)
DXBD_TTDATA 10
Duration of DTMF digits for dialing. (10ms units.)
DXBD_MFMINON 0
Minimum MF On.
The duration to be added to the standard
MF tone duration before the tone is detected. The minimum
detection duration is 65ms for KP tones and 40ms for all
other tones. This parameters affects all the channels on the
board (10ms units.)
DXBD_MFTONE 6
MF Minimum Tone Duration.
The duration of a dialed MF
tone. This parameter affects all the channels on the board.
Max value 10 (10ms units.)
DXBD_MFDELAY 6
MF Interdigit Delay.
The length of silence period between
tones during MF dialing. This parameter affects all the
channels on the board (10ms units.)
DXBD_MFLKPTONE 10
MF length of LKP Tone.
The length of the LKP tone during
MF dialing. This parameter affects all the channels on the
specified board. Max value 15 (10ms units.)
DXBD_T_IDD 5
DTMF Interdigit Delay.
Time between digits in DTMF
dialing. (10ms units.)
DXBD_MINOFFHKTM 25
0
Minimum Off-hook Time.
Specified in 10ms units.
HKLM\Software\Artisoft\TeleVantage\Server\VoiceBoard<n>
Key Default Description