System information

APPENDIX J. TELEVANTAGE CONFIGURATION SETTINGS J-25
If you assigned the lower board ID to the D/41JCT-LS board, the devices on the same boards
would have the names shown in the following table.
Dialogic Internet telephony board device names
You can disable Dialogic Internet telephony boards to make them available for
non-TeleVantage use, but you cannot disable individual channels on the boards. Board names
use the form
DM3Boardn, where n is the board number. The board number is assigned
sequentially starting with zero and is incremented by 1 for each board.
Dialogic telephony board settings___________________________
Dialogic telephony board settings consist of VoiceBoard keys, which apply to all channels for
a specified board number, and VoiceBoard Line keys, which apply to individual channels on the
board.
VoiceBoard settings
VoiceBoard keys are located under:
HKLM\SOFTWARE\Artisoft\TeleVantage\Server\VoiceBoard<n>
where <n> is the Dialogic board number (see “Dialogic device names” on page J-24 for an
explanation of board numbering conventions.)
Board Board ID Channel
D/120JCT-LS 0 DXXXB1C1 - LSI/VOX
DXXXB1C2 - LSI/VOX
DXXXB1C3 - LSI/VOX
DXXXB1C4 - LSI/VOX
D/41JCT-LS 1 DXXXB2C1 - LSI/VOX
DXXXB2C2 - LSI/VOX
DXXXB2C3 - LSI/VOX
DXXXB2C4 - LSI/VOX
DXXXB3C1 - VOX
DXXXB3C2 - VOX
DXXXB3C3 - VOX
DXXXB3C4 - VOX
HKLM\Software\Artisoft\TeleVantage\Server\VoiceBoard<n>
Key Default Description
DXBD_FLASHCHR &
Flash Character.
Character that causes a hook flash when
detected. (10ms units.)
DXBD_FLASHTM 50
Flash Time.
Length of time onhook during flash. (10ms
units.)