System information

J-22 INSTALLING TELEVANTAGE
To disable a board’s conference resources
1. Run
Regedit.
2. Create the following key (if it does not already exist):
HKLM\SOFTWARE\Artisoft\TeleVantage\Server\Settings\DisableDevices
3. Under DisableDevices, create a STRING Value containing the board name whose
conference resources you want to disable, using the appropriate format for your board
type as listed in the following table.
4. To disable conference resources on additional boards, repeat step 3 for each board.
5. Save the changes to the registry.
Changing a board’s conference priority
When a conference call is created, TeleVantage chooses which telephony board handles the
conference based on the board’s conference priority setting. The highest-priority board (with the
lowest priority number) that meets the conference requirements gets chosen first. The lower a
board’s priority number is, the more often it will be used for conference calls.
You might change a board’s conference priority to reserve the resources on the board for larger
conferences. For example, DI/SIx boards support up to 16 participants per conference, while the
DM/V2400A board supports up to 60 participants. While both boards have the same default
conference priority, you could change priorities so that the resources on the DI/SIx boards are
used first. That way, the DM/V2400A resources are available to handle conferences with more
than 16 participants.
Board Media Load Value where
DISIx analog station boards n/a /DCBBnDyn and y are the
board number
DI0408LSAR2 integrated trunk and station
board
ml3 or ml4
DM/IP241-1T1-P100 Internet telephony
board
ml11
DM/IP301-1E1-P100 Internet telephony
board
ml11
DM/V480A-2T1-PCI T1 trunk board ml10
DM/V600A-2E1-PCI E1 trunk board ml10
DM/V1200A-4E1-PCI E1 trunk board ul1
DM/V2400A conference bridge board ml9
Toshiba CS-DKTU digital station board n/a /DktConfBnn is the board
number