System information

APPENDIX J. TELEVANTAGE CONFIGURATION SETTINGS J-9
VoxHighEventInterval
DWORD value specifying the time interval (in milliseconds) for generating the Event
log message "No Voice Resource Available."
Default is
800000 (15 minutes.)
WaitLoopCurrenttimeout
DWORD value specifying the number of milliseconds to wait for loop current before
dialing an outside number. Set this to zero to skip loop current checks when making
outbound calls.
Default is
1400 milliseconds.
HKLM\Software\Artisoft\TeleVantage\Server\ Settings\DKT
CallWaitingInterval
DWORD value that controls how long (in milliseconds) Toshiba phones wait between
soft rings. The soft ring is the call waiting ring that occurs when a new incoming call
arrives to a PDN or SDN while the user is on a call. A value of 0 means the soft ring is
disabled.
Default is
3000 milliseconds.
SpeedDialMonitor
DWORD setting that specifies whether digital phone Busy Lamp Field (BLF) is
enabled or disabled system-wide. For more about BLF, see “Enabling digital phone
Busy Lamp Field for the system” in Chapter 7 in Administering TeleVantage.
When set to
1, BLF is enabled system-wide for all digital phones.
When set to
0 (the default), BLF is disabled system-wide.
HKLM\Software\Artisoft\TeleVantage\Server\ EXTBoard\ZipTone
Frequency
DWORD value that specifies the call waiting tone for external stations. Note that all SIP
and H.323 phones are defined as external station.
Changes to the settings take effect on all external stations on the next call waiting tone.
Default is
1250 Hz.
HKLM\Software\Artisoft\TeleVantage\Server\Settings\