System information

APPENDIX J. TELEVANTAGE CONFIGURATION SETTINGS J-7
NumLogs
DWORD value specifying the number of TeleVantage Server log files (
Tvlogxxx.TXT)
kept before they are overwritten.
This key interacts with
LogHours (see p. J-5) to determine how logs are kept. Each
Server log file grows to a maximum of 4MB in size before a new log file is created. The
Server keeps track of its logging rate and calculates whether the number of logs files
specified here will contain enough data to meet the required number of hours set by
LogHours. If not, TeleVantage automatically increases NumLogs so as to meet the
required number of hours.
To prevent automatic increasing of
NumLogs, set LogHours to 0.
NumLogs is set to 100 by the Server installer on a fresh install. If this key is deleted,
the default value is
1. To disable logging, set to 0.
PartyCustomDataMax
DWORD value specifying the maximum size allowed (in bytes) for custom data
attached to each party. If ViewPoint attempts to set custom data for a party that exceeds
this size, the attempt will be disallowed.
Default is
10000 bytes.
Q931DefaultSourceName
STRING value used when forwarding incoming PSTN calls without Caller ID to an
Internet Address or Enterprise Gateway service. The IP telephony board drivers will
substitute the string
“Name” unless another string is provided in the source address.
This key should have the same value as the
COMPANY setting (see page J-3).
Default is
“TeleVantage”.
SendDisplayOnAnswerCall
DWORD value specifying whether or not to display the company or user name to
inbound Internet callers. You may need to disable this setting to use certain IP boards
that do not support this feature.
Default is
0 (automatic), specifying that all boards except the IP041 boards provide a
display string when answering a call. A setting of
1 always provides a display string. A
setting of
2 never provides a display string.
TruncateRecordings
DWORD value specifying whether or not TeleVantage should truncate extra silence at
the end of voice message recordings.
Default is
1 (silence is truncated.) A value of 0 specifies that extra silence is not
truncated.
HKLM\Software\Artisoft\TeleVantage\Server\Settings\