System information

E-4 INSTALLING TELEVANTAGE
SUPPRESS_MSGS Integer 0 = (Default) Workstation Setup displays message
boxes on the PC where the applications are
installed. Workstation Setup stops processing and
waits until someone responds to each message
box.
1 = Suppress display of message boxes. The
messages are still written to the Workstation Setup
Log (see “Performing a typical unattended
installation” on page E-1.)
Use the following 4 parameters to specify the complete path to the location where a
workstation application will be installed, for example:
TVCLIENTFOLDER= /"C:\Program Files\TV Client/"
If not specified, the application will be installed in the default location.
TVCLIENTFOLDER String Location where ViewPoint will be installed.
TVADMINFOLDER String Location where the Administrator will be installed.
TVTSPFOLDER String Location where the single-line TAPI Service
Provider will be installed.
TVCMAFOLDER String Location where the Contact Manager Assistant will
be installed.
Optionally, use the following 4 parameters if you are installing the single-line TAPI Service
Provider ( ADD_LOCAL= TSP or ADD_LOCAL= ALL.) If you do not provide this information during
the unattended install, you must run the TAPI Configuration Wizard later to configure TAPI SP
for the user at this PC. See “Configuring the TeleVantage TAPI Service Provider” on page 11-8
for more information
TVUSER String TAPI SP only. User name of the person assigned
to the station ID in TVSTATION:
TVUSER= SRyan
Note: TVUSER must be the user assigned to the
station ID in TVSTATION, else this parameter is
ignored.
TVPASSWORD String TAPI SP only. User’s TeleVantage password:
PASSWORD= 17530
Name Value Description