System information

CHAPTER 17. INSTALLING THE TFTP SERVICE 17-5
8. Once configured properly, start the Tftpd32 TFTP Server using the Windows Services
control panel, and set the Tftpd32 TFTP Server service to auto-start. To do so, click
Start > Settings > Control Panel > Administrative Tools > Services.
9. In the Services dialog box, locate and double-click
Tftpd32 TFTP Server.
10. On the General tab of the Properties dialog box, select
Automatic from the Startup
type
drop-down list. Click Start to start the Tftpd32 TFTP Server without rebooting.
11. Click
OK, and then exit the Services dialog box.
12. Depending on the phones you are using, copy the entire contents of one of the
following folders on the Master CD to the same folder where you installed the Tftpd32
TFTP Server (the default location is
C:\Program Files\TeleVantage\Tftpd32\.)
\IPPhones\SIP\Aastra
\IPPhones\SIP\Aastra\1.2.5 Build 316 (Copy the contents of this folder if you are
using any Vertical Aastra 480i CT IP Phones with cordless handset and base
station.)
\IPPhones\H323\Polycom
\IPPhones\H323\Uniden
Note:
Additional required configuration steps for these phones are described in
Chapters 14 and 15 in Administering TeleVantage.
13. Important: In Windows Explorer, share the directory where you installed the Tftpd32
TFTP Server to the account used by the TeleVantage Server and to all users who will
need to run the TeleVantage Administrator. When you set up the share, use the share
name TFTP, so that once shared, you can refer to it as a UNC path, for example
\\TeleVantage\TFTP.