System information

11-6 INSTALLING TELEVANTAGE
7. In the TeleVantage Server Information dialog box, enter the TeleVantage Server
Name
and the Telephone Station ID of the phone that will be used by the person at
this PC.
The station ID corresponds to the port number on the station board to which the phone
is connected. To hear your station ID, pick up the phone and dial
*0.
Note:
If there is not a TeleVantage phone near this PC, enter a station ID of 0. Without
a phone, the user at this PC will be able to perform all functions with the exception of
managing calls and recording voice prompts. If you enter a station ID of 0, when you
click Next the No Telephone Station ID Specified dialog box opens to make sure that
you understand this limitation, and gives you the opportunity to go back and enter a valid
station ID.
Click Next to continue.
8. In the Setup Type dialog box, select one of the following:
Q Select Typical to install the listed workstation applications in the default
location.When installing TeleVantage for the first time, only ViewPoint is installed.
When upgrading from a previous version of TeleVantage, Workstation Setup
detects the workstation applications that are installed, and upgrades those
applications to the current version.
Click
Next to continue. Go to step 10.
Q Select Custom to choose which workstation applications to install, including the
TAPI Service Provider, Contact Manager Assistant, and Archived Recording
Browser, or to change the installation drive or folder.
Click
Next to continue.
9. In the Custom Setup screen, you can do any of the following:
Q Click a workstation application to see a description of it as well as the amount of
disk space it requires.
Q Click Space to check the available space on each hard drive on the PC.
Q Click Change to change the destination drive or folder where the selected
workstation application will be installed. You can specify a different location for
each workstation application.
Q If you do not want to install one of the listed workstation applications on this PC,
click the drop-down list for the application and then select
This feature will not be
available.
Q To install another listed workstation application, click the drop-down list for the
application and then select
This feature will be installed on local hard drive.
Click
Next to continue.