System information

CHAPTER 10. INSTALLING THE TELEVANTAGE SERVER SOFTWARE 10-15
Installing the TeleVantage Administrator _____________________
This section explains how use the TeleVantage Workstation Setup program to install the
TeleVantage Administrator in the default location on the TeleVantage Server PC.
Note:
You will use Workstation Setup again in Chapter 11 to install the TeleVantage workstation
applications on other PCs or to install other workstation applications on the Server. All the
Workstation Setup options are described in that chapter.
To install the TeleVantage Administrator on the TeleVantage Server PC
1. If you came here by checking select the
Launch the TeleVantage Workstation Setup
checkbox at the end of the TeleVantage Server Setup program, go to step 5.
2. Log on to the TeleVantage Server PC as the same user you specified when you
installed the TeleVantage Server.
3. Close all open Windows applications.
4. If the TeleVantage Workstation Setup is not running, from the Start menu, choose
Programs > Vertical TeleVantage > TeleVantage Workstation Setup. Follow the
on-screen instructions.
5. When the Welcome to the TeleVantage Workstation Setup screen appears, click
Next
to continue.
6. Review the License Agreement. Click
I accept the terms in this license agreement,
and then click
Next to continue.
7. In the Customer Information screen, enter your
User Name and Organization.
8. In the TeleVantage Server Information screen, enter the
TeleVantage Server Name
and the
Telephone Station ID of the phone that will be used by the person
administering the TeleVantage system from this PC (the Admin user).
The station ID corresponds to the port number on the station board to which the phone
is connected. To hear your station ID, pick up the phone and dial
*0.
Note:
If there is not a TeleVantage phone near this PC, enter a station ID of 0. Without
a phone, the user administering TeleVantage from this PC will be able to perform all
administrative functions with the exception of recording voice prompts. If you enter a
station ID of 0, when you click Next, the No Telephone Station ID Specified screen
opens to make sure that you understand this limitation, and gives you the opportunity
to go back and enter a valid station ID.
Select Only for me if you want only this user to be able to run the Administrator from
this PC.
Click
Next to continue.