User guide

SUMMIT SWITCH INSTALLATION AND USER GUIDE 6-3
D ISPLAYING FDB E NTRIES
FDB CONFIGURATION EXAMPLE
This example adds a permanent entry to the FDB:
create fdbentry 00:E0:2B:12:34:56 vlan marketing port 4
The permanent entry has the following characteristics:
¥ MAC address is 00E02B123456.
¥ VLAN name is marketing.
¥ Port number for this device is 4.
DISPLAYING FDB ENTRIES
To display FDB entries, use the command
show fdb {all | <macaddress> | vlan <name> | <portlist> | permanent}
where the following is true:
¥ all Ñ Displays all FDB entries.
¥ macaddress Ñ Displays the entry for a particular MAC address.
¥ vlan <name> Ñ Displays the entries for a VLAN.
¥ portlist Ñ Displays the entries for a port.
¥ permanent Ñ Displays all permanent entries.
config fdb agingtime <delay> Configures the FDB aging time. The range is 15
through 1,000,000 seconds. The default value is
300 seconds. A value of 0 indicates that the entry
should never be aged out.
Table 6-1: FDB Configuration Commands (continued)
Command Description
SUMMIT.BK Page 3 Thursday, September 25, 1997 12:33 PM