User guide

SUMMIT SWITCH INSTALLATION AND USER GUIDE 4-23
S UMMIT C OMMANDS
RIP COMMANDS
Table 4-17 describes the commands used to conÞgure the RIP protocol.
config irdp <mininterval> <maxinterval>
<lifetime> <preference>
Configures the router advertisement message
timers, using seconds. Specify:
■ mininterval — The minimum amount of
time between router advertisements. The
default setting is 450 seconds.
■ maxinterval — The maximum time
between router advertisements. The default
setting is 600 seconds.
■ lifetime — The default setting is 1,800
seconds.
■ preference
unconfig icmp Resets all ICMP settings to the default values.
unconfig irdp Resets all router advertisement settings to the
default values.
disable irdp {vlan <name> | all} Disables the generation of router
advertisement messages on one or more
VLANs.
Table 4-17: RIP Commands
Command Description
show rip {vlan <name> | all} Displays RIP configuration and statistics for
one or more VLANs. Display includes the
state for RIP settings, and interface states.
Statistics include the following:
■ Packets transmitted
■ Packets received
■ Bad packets received
■ Bad routes received
■ Number of RIP peers
■ Peer information
Table 4-16: ICMP Commands (continued)
Command Description
SUMMIT.BK Page 23 Thursday, September 25, 1997 12:33 PM