User guide

4-18 SUMMIT SWITCH INSTALLATION AND USER GUIDE

OMMANDS

BASIC IP COMMANDS

Table 4-13 describes basic IP commands.

config qosmode [explicit | implicit] Changes the QoS mode to explicit mode or

implicit mode.

create qosprofile <qosname> Creates a QoS profile. The default values

assigned to a created QoS profile are as

follows:

■ Minimum bandwidth — 0%

■ Maximum bandwidth — 100%

■ Priority — low

delete qosprofile <qosname> Deletes a QoS profile.

config qosprofile <qosname> {minbw

<percent>} {maxbw <percent>} {priority

<level>}

Configures a QoS profile. Specify:

■ minbw — The minimum bandwidth

percentage guaranteed to be available to

this queue. The default setting is 0.

■ maxbw — The maximum bandwidth

percentage that this queue is permitted to

use. The default setting is 100.

■ priority — The service priority for this

queue. Settings include low, medium-low,

medium, high. The default setting is low.

Table 4-13: Basic IP Commands

Command Description

show ip config {vlan [<name> | all]} Displays configuration information for one or

more VLANs, including the following:

■ IP address, subnet mask

■ IP forwarding information

■ BOOTP configuration

■ VLAN name, VLANid

Table 4-12: QoS Commands (continued)

Command Description

SUMMIT.BK Page 18 Thursday, September 25, 1997 12:33 PM