User guide

SUMMIT SWITCH INSTALLATION AND USER GUIDE 4-13

UMMIT

OMMANDS

PROTOCOL COMMANDS

Table 4-8 describes protocol commands.

FDB COMMANDS

Table 4-9 describes FDB commands.

Table 4-8: Protocol Commands

Command Description

show protocol {<protocol_name> | all} Displays protocol-related information, including:

■ Protocol name

■ List of protocol fields

■ List of VLANs that use this protocol

create protocol <protocol _ name> Creates a user-defined protocol.

delete protocol <protocol_name> Removes a protocol.

config protocol <protocol_name> [add |

delete] <prototype_number>

{<prototype_number>} ...

Configures a protocol filter. Supported protocol

types include:

■ EtherType

■ LLC

■ SNAP

Table 4-9: FDB Commands

Command Description

show fdb {all | <mac_address> | vlan <name> |

<portlist> | permanent}

Displays the forwarding database contents

including MAC address, associated VLAN,

port, age-of-entry configuration method, and

status. Providing one of the options acts as a

filter on the display. Providing a VLAN name

displays all entries for the VLAN. Use the MAC

address to locate a specific entry in the FDB.

clear fdb {all | <mac_address> | vlan <name>

| <portlist> }

Clears dynamic FDB entries that match the

filter. Use the keyword all to clear all dynamic

entries.

SUMMIT.BK Page 13 Thursday, September 25, 1997 12:33 PM