User guide

1-14 SUMMIT SWITCH INSTALLATION AND USER GUIDE
S UMMIT O VERVIEW
MAC ADDRESS
This label shows the unique Ethernet MAC address assigned to this device.
FACTORY DEFAULTS
Table 1-5 shows factory defaults for the Summit features.
Table 1-5: Summit Factory Defaults
Item Default Setting
Port status Enabled on all ports.
Serial or Telnet user account admin with no password and user with no password.
Console port configuration 9600 baud, eight data bits, one stop bit, no parity, XON/XOFF
flow control enabled.
Web network management Enabled.
SNMP read community string public.
SNMP write community string private.
RMON history session Enabled.
RMON alarms Disabled.
BOOTP Enabled on the default VLAN ( default ).
QoS All traffic is part of the default queue.
802.1p priority Recognition enabled.
Virtual LANs One VLAN named default ; all ports belong to the default
VLAN. The default VLAN belongs to the STPD named
s0 .
802.1Q tagging All packets are untagged on the default VLAN ( default)
Spanning Tree Protocol Disabled; one STPD ( s0 ).
IP Routing Disabled.
Forwarding database aging
period
300 seconds (5 minutes).
SUMMIT.BK Page 14 Thursday, September 25, 1997 12:33 PM