User guide

SUMMIT SWITCH INSTALLATION AND USER GUIDE A-1
A
Safety Information
IMPORTANT SAFETY INFORMATION
Please read the following safety information thoroughly before installing the
Summit Switch.
¥ Installation and removal of the unit must be carried out by qualiÞed personnel only.
¥ To reduce the risk of Þre or electrical shock, install the unit in a temperature- and
humidity-controlled indoor area free of conductive contaminants.
POWER
¥ Disconnect power from the unit before removing the cover of the unit.
¥ To ensure compliance with international safety standards, only use the power
adapter that is supplied with the unit.
¥ Disconnect the power adapter before removing the unit.
¥ The unit must be grounded.
¥ The unit must be connected to a grounded outlet to comply with European safety
standards.
¥ Do not connect the unit to an A C outlet (power supply) without a ground
connection.
¥ The socket outlet must be near to the unit and easily accessible. You can only remove
power from the unit by disconnecting the power cord from the outlet.
SUMMIT.BK Page 1 Thursday, September 25, 1997 12:33 PM