User guide

11-4 SUMMIT SWITCH INSTALLATION AND USER GUIDE
S OFTWARE U PGRADE AND B OOT O PTIONS
use config {primary | secondary } Configures the Switch to use a particular
configuration on the next reboot. Options
include the primary configuration area, or the
secondary configuration area. If not specified,
the Switch will use the primary configuration
area.
use image {primary | secondary} Configures the Switch to use a particular
image on the next reboot. If not specified, the
Switch uses the primary image.
Table 11-1: Boot Option Commands (continued)
Command Description
SUMMIT.BK Page 4 Thursday, September 25, 1997 12:33 PM