User guide

10-2 SUMMIT SWITCH INSTALLATION AND USER GUIDE
S TATUS M ONITORING AND S TATISTICS
show fdb {all | <macaddress> | vlan
<name> | <portlist> | permanent}
Displays the forwarding database contents including
MAC address, associated VLAN, port, age-of-entry
configuration method, and status. Providing one of
the options acts as a filter on the display. Providing a
VLAN name displays all entries for the VLAN. Use
the MAC address to locate a specific entry in the
FDB.
show ip config {vlan <name> | all} Displays configuration information for one or more
VLANs, including the following:
■ IP address, subnet mask
■ IP forwarding information
■ BOOTP configuration
■ VLAN name, VLANid
■ Global ICMP configuration
■ Global IGMP configuration
■ Global IRDP configuration
show iparp {<ip_address> | vlan
<name> | all | permanent}
Displays the current Address Resolution Protocol
(ARP) cache for a selected IP address, VLAN, or all
entries. With no options, information for all VLANs is
displayed.
Information displayed includes IP address, MAC
address, aging timer value, VLAN name, VLANid, and
port number.
show ipfdb {<ipaddress> | vlan <name>
| all}
Displays the contents of the IP forwarding database
table. Use for technical support purposes.
show ipmcroute {vlan <name> | all |
permanent}
Displays the contents of the IP multicast route table.
show iproute vlan {<name> | all |
permanent}
Displays the contents of the IP routing table.
show ipstats {vlan [<name> | all]} Displays statistics of packets handled by the CPU,
including the following:
■ inpackets, outpackets
■ ICMP/IGMP statistics
■ IRDP statistics
Table 10-1: Switch Monitoring Commands (continued)
Command Description
SUMMIT.BK Page 2 Thursday, September 25, 1997 12:33 PM