User guide

9-14 SUMMIT SWITCH INSTALLATION AND USER GUIDE
IP U NICAST R OUTING
disable icmp redirects {vlan <name> | all} Disables the generation of ICMP redirects on one
or more VLANs.
disable icmp unreachables Disables the generation of ICMP unreachable
messages on one or more VLANs.
disable icmp useredirects Disables the changing of routing table information
when an ICMP redirect message is received.
disable ipforwarding {vlan <name> | all} Disables routing for one or more VLANs.
disable ipforwarding broadcast {vlan
<name> | all}
Disables routing of broadcasts to other networks.
disable irdp {vlan <name> | all} Disables the generation of router advertisement
messages on one or more VLANs.
disable rip {vlan <name | all} Disables RIP for one or more VLANs. When RIP
is disabled, the parameters are not reset to their
defaults, and the states are not cleared.
Disables RIP for a VLAN causes all routes
learned from that VLAN to be advertised with a
GarbageTime metric of 16, before being deleted
from the route table.
disable rip aggregation Disables the RIP aggregation of subnet
information on a RIP version 2 interface.
disable rip splithorizon Disables split horizon.
disable rip poisonreverse Disables poison reverse.
disable rip triggerupdate Disables triggered updates.
disable rip exportstatic Disables the filtering of static routes.
unconfig icmp Resets all ICMP settings to the default values.
unconfig irdp Resets all router advertisement settings to the
default values.
unconfig rip {vlan <name> | all} Resets all RIP parameters to the default VLAN.
Does not change the enable/disable state of the
RIP settings.
Table 9-6: Router Reset and Disable Commands (continued)
Command Description
SUMMIT.BK Page 14 Thursday, September 25, 1997 12:33 PM