User guide

SUMMIT SWITCH INSTALLATION AND USER GUIDE 9-13
R ESETTING AND D ISABLING R OUTER S ETTINGS
RESETTING AND DISABLING ROUTER SETTINGS
To return router settings to their defaults and disable routing functions, use the
commands listed in Table 9-6.
show rip {vlan <name> | all} Displays RIP configuration and statistics for
one or more VLANs. Display includes the
state for RIP settings, and interface states.
Statistics include the following:
■ Packets transmitted
■ Packets received
■ Bad packets received
■ Bad routes received
■ Number of RIP peers
■ Peer information
show rip stat {vlan <name> | all} Displays RIP-specific statistics. Statistics
include the following per interface:
■ Packets transmitted
■ Packets received
■ Bad packets received
■ Bad routes received
■ Number of RIP peers
■ Peer information
Table 9-6: Router Reset and Disable Commands
Command Description
clear iparp [<ipaddress> | vlan <name> | all] Removes dynamic entries in the IP ARP table.
Permanent IP ARP entries are not affected.
clear ipfdb [<ipaddress> <netmask> | vlan
<name> | all]
Removes the dynamic entries in the IP
forwarding database.
disable bootp vlan [<name> | all] Disables the generation and processing of
BOOTP packets.
disable bootprelay Disables the forwarding of BOOTP requests.
Table 9-5: Router Show Commands (continued)
Command Description
SUMMIT.BK Page 13 Thursday, September 25, 1997 12:33 PM