User guide

9-12 SUMMIT SWITCH INSTALLATION AND USER GUIDE
IP U NICAST R OUTING
DISPLAYING ROUTER SETTINGS
To display settings for various IP routing components, use the commands listed in
Table 9-5.
Table 9-5: Router Show Commands
Command Description
show ip config {vlan <name> | all} Displays configuration information for one or
more VLANs, including the following:
■ IP address, subnet mask
■ IP forwarding information
■ BOOTP configuration
■ VLAN name, VLANid
■ Global ICMP configuration
■ Global router advertisement configuration
show ip stats {vlan [<name> | all]} Displays IP statistics for the CPU of the
Switch.
show iparp {<ipaddress | vlan <name> | all |
permanent}
Displays the IP Address Resolution Protocol
(ARP) table. You can filter the display by IP
address, VLAN, or permanent entries. Each
entry displayed includes the following:
■ IP address
■ MAC address
■ Aging timer value
■ VLAN name, VLANid, and port number
■ Flags
show ipfdb {<ipaddress> <netmask> | vlan
<name> | all}
Displays the contents of the IP forwarding
database table. Used for technical support
purposes.
show iproute vlan {<name> | all | permanent |
<ipaddress> <netmask>}
Displays the contents of the IP routing table.
SUMMIT.BK Page 12 Thursday, September 25, 1997 12:33 PM