User guide

9-10 SUMMIT SWITCH INSTALLATION AND USER GUIDE
IP U NICAST R OUTING
ROUTING CONFIGURATION EXAMPLE
Figure 9-2 illustrates a Switch that has three VLANs deÞned as follows:
¥ Finance
Ñ Protocol-sensitive VLAN using the IP protocol
Ñ Ports 1 and 3 have been assigned
Ñ IP address 192.207.35.1
¥ Personnel
Ñ Protocol-sensitive VLAN using the IP protocol
Ñ Ports 2 and 4 have been assigned
Ñ IP address 192.207.36.1
¥ MyCompany
Ñ Port-based VLAN
Ñ All ports have been assigned
The stations connected to ports 1 through 4 generate a combination of IP trafÞc and
NetBIOS trafÞc. The IP trafÞc is Þltered by the protocol-sensitive VLANs. All other
trafÞc is directed to the VLAN MyCompany.
disable irdp {vlan <name> | all} Disables the generation of router
advertisement messages on one or more
VLANs.
Table 9-4: ICMP Configuration Commands (continued)
Command Description
SUMMIT.BK Page 10 Thursday, September 25, 1997 12:33 PM