User guide

SUMMIT SWITCH INSTALLATION AND USER GUIDE 8-3

UILDING

LOCKS

PREDEFINED QOS PROFILES

The following predeÞned QoS proÞles are provided, depending upon the QoS

conÞguration of the Switch:

¥ Implicit QoS Mode Ñ A single QoS mode, called besteffort, is provided. It allows for

0% minimum and 100% maximum bandwidth along with a low-priority setting. Up

to 15 other QoS proÞles may be deÞned.

¥ Explicit QoS Mode Ñ Four separate explicit QoS proÞles, each with varying

priorities, are deÞned. They are as follows:

Ñ qplow

Ñ qpnormal

Ñ qpmedium

Ñ qphigh

All have bandwidth parameters of a minimum of 10% and a maximum of 100%

bandwidth.

CREATING A QOS PROFILE

Up to 32 QoS proÞles can be created on the Summit. To create a QoS proÞle, use the

following command:

create qosprofile <name>

A new QoS proÞle is created with the following default values:

¥ Minimum bandwidth Ñ 0%

¥ Maximum bandwidth Ñ 100%

¥ Priority Ñ low

Each of the default values is conÞgurable by using the following command:

config qosprofile <qosname> {minbw <percent>} {maxbw <percent>}

{priority <level>}

SUMMIT.BK Page 3 Thursday, September 25, 1997 12:33 PM