Technical data

Differential Ring 3-72
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
RELATED FEATURES
Class of Service … see page 3-63
Auto Service Mode Control … see page 3-10
Day/Night/Timed Ring Mode … see page 7-37
Authorization Codes (Password) … see page 3-5
Differential Ring
Differential Ring provides one of 4 different audible Ring signals to be assigned to a Digital
Phone, allowing users to determine which phone is ringing and the type of call (Intercom or
CO/IP). When the phone receives an incoming call, the designated ring signal is provided over
the speaker. Different selections are assigned for Intercom and CO/IP calls.
CONDITIONS
- Each DN and CO line can be set to have one of 9 digit conversion Tables.
- There are 300 entries for each digit conversion table.
- The Digit Conversion Table allows up to 16 digits to be programmed as 'dialed digit'
and 'converted digit'.
- The following features have higher priority over digit conversion;
- AND (Automatic Network Dialing)
- Automatic CO seize
- In Call log, dialed digit is displayed on the station's LCD.
OPERATION
Digital Phone
To select the desired ring tone:
1. Press the [PGM] button.
2. Dial 2 (Ring Selection).
3. Dial 1 (Intercom) or 2 (CO/IP) ring.
4. Dial 1 (Ring Source).
5. Dial Ring Tone selection – 1-4: Digit Phone 1-8: IP Phone
6. Ring Tone is presented.
7. Press the [SAVE] button.
Release 1.0
November 2010