Technical data

Dialing Restrictions 3-70
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
System
Toll Exception Table (PGM 250) … see details on page A-107
Walking COS
A User may temporarily override Toll Restriction at a Station to make Toll Calls from a normally
Toll Restricted station. An Authorization Code is required in order to activate Walking COS.
CONDITIONS
- The Station COS applied for Walking COS is the COS of the station.
- Walking COS applies the temporary COS for only one call; terminating the call returns
the station to the assigned Station COS. The user may reactivate Walking COS to
place another call or press the Flash key (instead of hook-switch) at the end of
previous call to maintain Walking COS.
OPERATION
Digital Phone
To activate Walking COS:
1. Press the [PGM] button.
2. Dial 33, {Walking COS code}.
3. Enter the Station number.
4. Dial the Station Authorization code (password).
5. Dial
*
(end mark).
6. Place a call in the normal manner.
Single Line Phone
To activate Walking COS:
1. Dial the {SLT Programming code}.
2. Dial ‘33’, the Walking COS code.
3. Enter the Station number.
PGM 250 BTN RANGE DEFAULT
ALLOW TABLE -- allow digits. 1 Max 16 digits -
DENY TABLE -- deny digits. 2 Max 16 digits -
TENANT -- Tenant groups to apply the table entry. 3 1-9 (MBX IP 300)
1-5 (MBX IP 100)
-
Release 1.0
November 2010