Technical data

Diagnostic/Maintenance 3-59
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
Table Data
Announcement Table (PGM 259) … see details on page A-114
Diagnostic/Maintenance
The System software incorporates various diagnostic and maintenance routines that may be
“called” remotely or locally through the System RS-232 Serial ports, a TCP/IP connection using
a Web browser established over IP networks or a PPP connection over ISDN.
Routines that can be accessed include trace functions at the device level, commands for
diagnostics and maintenance, and tools for manipulation at the OS level.
An optional Network Management System (NMS) application is available providing remote
access to the system for maintenance and diagnostics.
FEATURE DELAY -- If Service type is set to
Feature code, it can be delayed.
3 00-30 00
100 (0) -- Assigned station and delay value can
be displayed. Volume Up/Down key is used to
scroll data.
4- -
MEMBER ASSIGN -- To change station's ring
assign status, enter desired station range. (Max
30 stations can be assigned)
5 Start Station & End
Station
-
DELAY -- Enter delay value; if delay is 0, station
will start to ring immediately. If delay value is
deleted, the station will not ring.
Otherwise if delay is 1-9, the station will start to
ring after delay time(3 times of delay value)
5-1 0-9 Sta 100 (Port 0):delay 0
Others: not assigned
PGM 259 BTN RANGE DEFAULT
The VMIB slot & Prompt No. to be used for playing the VMIB
Announcement No.
1-4 VMIB Slot (00-18) &
Prompt No (01-70)
-
CCR Index used for playing the VMIB Announcement No. 5 1-100 -
PGM 167 BTN RANGE DEFAULT
Release 1.0
November 2010