Technical data

Conference 3-54
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
To reenter the Supervised Conference:
Press the flashing [CONF] button.
Conf Party To extend the Unsupervised Conference from a connected party:
Dial the Timer extension multiplier (1-9).
ADMIN PROGRAMMING
Station Data
Conference Access (PGM 133 - FLEX 2) … see details on page A-35
CO Line Data
Unsupervised Conference Timer (PGM 166 - FLEX 9) … see details on page A-52
Unsupervised Conference Timer (PGM 171 - FLEX 6) … see details on page A-59
Unsupervised Conference Extend (PGM 171 - FLEX 2) … see details on page A-59
PGM 133 BTN RANGE DEFAULT
CONFERENCE ACCESS -- enable Conference call. 2 0: Disable
1: Enable
Enable
PGM 166 BTN RANGE DEFAULT
UNSUP CONF TIMER (Incoming CO) -- when there is
conference call without supervisor, or there is any CO-to-CO
call, the call is disconnected after timer expires. The warning
tone is heard before the line is disconnected.
9 000-255 (min) 000
PGM 171 BTN RANGE DEFAULT
UNSUP CONF TIMER (Outgoing CO) -- when there is
conference call without supervisor, or there is any CO-to-CO call,
the call is disconnected after the timer expires. The warning tone
is heard before the line is disconnected.
6 000-255 (min) 000
PGM 171 BTN RANGE DEFAULT
UNSUP CONF EXTEND -- if this feature is set to ON,
Unsupervised Conf Timer can be extended by dialing feature
code after warning tone is heard.
20: Off
1: On
Off
Release 1.0
November 2010