Technical data

Conference 3-51
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
11. Repeat steps 3 and 4 above to add additional conference parties (up to 13 total per
conference).
To get out from a conference temporarily:
Press the [CONF] button, the [CONF] button LED will flash.
To return to a conference call:
Press the flashing [CONF] button.
Single Line Phone
To establish an ad-hoc conference: ("Conference Member Manual Add" is set ON)
1. Establish the first call.
2. Press the hook-switch, the connected party is placed on exclusive hold and the user
receives a dial tone.
3. Dial the {Conference Member Add Code}.
4. Place the second call.
5. When connected, repeat steps 2-4 above to add additional parties. {Conference
Member Add Code} should be dialed at least once.
6. When completed adding parties, quickly press the hook-switch twice (within 2
seconds), all parties will be connected.
To establish an ad-hoc conference: ("Conference Member Manual Add" is set OFF)
1. Establish the first call.
2. Press the hook-switch, the connected party is placed on exclusive hold and the user
receives a dial tone.
3. Dial the {Conference Member Add Code}.
4. Place the second call.
5. When connected, the called party is put into conference and calling party also returns
to conference.
6. Repeat steps 2-5 above to add additional parties. {Conference Member Add Code}
should be dialed at least once.
Release 1.0
November 2010