Technical data

Board TNET Attributes (PGM 334) A-150
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Board TNET Attributes (PGM 334)
When a board or MBX IP-gateway module is to be connected in a Centralized Control network
(TNET), the TNET operation of board or MBX IP-gateway module can be enabled or disabled.
1. Press the [PGM] button and dial 334.
2. Enter Slot No.
3. Use the dial pad to enable or disable TNET, Central Control networking.
4. Press the [SAVE] button to store the new data.
IP Phone TNET Attributes (PGM 335)
When an IP-Phone is to be connected in a Centralized Control network (TNET), the TNET
operation of the IP-Phone can be enabled or disabled.
1. Press the [PGM] button and dial 335.
2. Enter Bin No of IP Phone (001-108 for MBX IP-100, 001-324 for MBX IP 300).
3. Use the dial pad to enable or disable TNET, Central Control networking.
4. Press the [SAVE] button to store the new data.
H.323 DATA - PGM 360-363
The MPB incorporates a 4-channel VoIU. The VOIB8 provides up to eight (8) VoIP channels
and the VOIB24 provides up to 24 VOIP channels. These VOIP channels are used for
Distributed Networking, access to SIP or H.323 networks and for remote MBX IP devices.
When VOIP channels are used for H.323 Calls, the following items should be assigned.
H.323 Routing Attributes (PGM 360)
To make a direct H.323, the System assigns an unique number to each H323 IP-Address; direct
H.323 can be made by dialing the assigned number.
1. Press the [PGM] button and dial 360.
2. Enter the CO Group Number.
3. Enter the Prefix bin no (01-50).
4. Press Flex 1 or 2, and dial the desired data.
5. Press the [SAVE] button to store the new data.
T
his
f
ea
t
ur
e is
no
t
a
va
ilab
le a
t
t
his
t
ime
..
.
Release 1.0
November 2010