Technical data

CO/IP Queuing 3-46
Chapter 3: System Features
MBX IP Description / Operations & Programming Guide
To cancel the queue from the queued station:
Press the [MSG/CALLBK] button, the [MSG/CALLBK] LED extinguishes.
Single Line Phone
To request to be placed in queue while receiving the “All Lines Busy” signal:
1. Press the hook-switch.
2. Enter the {Call Back Feature code}.
To cancel the queue from the queued station:
1. Lift the handset.
2. Enter the {Call Back Cancel Feature code}.
System
When a CO/IP line becomes available:
A distinctive Queue Recall is sent to the station with the oldest queued call, the
appropriate {CO/IP} line button LED will flash; the CO/IP line and station will appear busy
to all other users.
ADMIN PROGRAMMING
Station Data
CO Queuing Access (PGM 133 - FLEX 1) … see details on page A-35
Numbering Data
CO Group Access Code (PGM 114) … see details on page A-22
PGM 133 BTN RANGE DEFAULT
CO QUEUE ACCESS -- enable CO Queuing. 1 0: Disable
1: Enable
Enable
PGM 114 BTN RANGE REMARK
CO GRP ACCESS CODE (Edit By Range) 1 Start CO Grp Access Code
& End CO Grp Access Code
-
CO GRP ACCESS CODE (Edit) 2 CO Grp Access Code -
Release 1.0
November 2010