Technical data

Reset Board (PGM 310) A-145
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Reset Board (PGM 310)
Each board in the system can be reset with this menu.
1. Press the [PGM] button and dial 310.
2. Enter desired Slot Number with 2 digits.
3. Press the [SAVE] button to reset the board.
NETWORKING DATA - PGM 320-321
Net Basic Attribute (PGM 320)
The Network Basic Attributes are displayed and the PGM 320 table provides general
descriptive information and input ranges.
1. Press the [PGM] button and dial 320.
2. Press the Flex 1-10 for the desired setting (refer to Table).
3. Use the dial pad to enter the required data.
4. Press the [SAVE] button to store the new data.
DHCP USAGE -- DHCP Usage. 4 0:Off
1:On
Off
T38 USAGE -- T38 Usage. 5 0:Off
1:On
Off
RTP SECURITY -- RTP SecurityUsage. 6 0:Off
1:On
Off
VLAN -- VLan 7 0000-4096 None
PRIORITY -- Priority 8 0-7 0
DIFFSERV -- Diffserv 9 00-63 0
PGM 320 BTN RANGE DEFAULT
NET ENABLE -- Enable Networking function. 1 0:Off
1:On
Off
NET CNIP ENABLE -- The name of the calling station is sent to the
called System between MBX IP systems. CNIP is displayed at the
called party Stations display based on the programming.
2 0:Off
1:On
On
PGM 305 BTN RANGE DEFAULT
Release 1.0
November 2010