Technical data

BOARD DATA - PGM 300-310 A-143
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
BOARD DATA - PGM 300-310
ISDN Board Attribute (PGM 300)
PRIB and E1R2 boards have some attributes which can be programmed by the Administrator.
1. Press the [PGM] button and dial 300.
2. Enter ISDN slot number with 2 digits.
3. Press the Flex button 1-8 for the desired setting (refer to Table); use the dial pad to enter
the required data.
4. Press the [SAVE] button to store the new data.
72 Tenant Dial Tone Reserved
73 Two-way Record Warning Tone This is provided to the associate party when
station starts call recording
PGM 300 BTN RANGE DEFAULT
CRC CHECK -- Enable CRC check. 1 0: Disable
1: Enable
Enable
NT/TE MODE – After change, the board is automatically restarted. 2 0: TE
1: NT
TE
PORT1 TEI MODE -- TEI mode of BRIB Port 1. 3 N/A N/A
PORT2 TEI MODE -- TEI mode of BRIB Port 2. 4 N/A N/A
PORT3 TEI MODE -- TEI mode of BRIB Port 3. 5 N/A N/A
PORT4 TEI MODE -- TEI mode of BRIB Port 4. 6 N/A N/A
T1 MODE -- T1 Mode (D4/ESF). 7 0:D4
1:ESF
0
T1 LINE MODE -- T1 Line Mode (B8ZS/AMI). 8 0:B8ZS
1:AMI
B8ZS
T1 PAUSE TIME -- T1 Pause Time. 9 1-9 2
T1 PLS RATE -- T1 PLS Rate. 10 0-3 0
T1 RLS GRD TIME -- T1 release guard time. 11 0-60 20
T1 DT DELAY TIME -- T1 DT Delay time. 12 2-50 10
INDEX TONE NAME DESCRIPTION
Release 1.0
November 2010