Technical data

Tenant Tone Table (PGM 290) A-139
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Tone Index Table
PROMPT/ANNC RPT -- The VMIB Prompt or
Announcement Repeat number when tone type is
VMIB Prompt or announcement.
5 0-100 1
PROMPT/ANNC INTVL -- The VMIB Prompt or
Announcement Repeat interval when VMIB
Prompt or announcement. Repeat is assigned.
6 0-100 0
INDEX TONE NAME DESCRIPTION
1 1st Dial Tone This is provided when station goes off-hook.
2 2nd Dial Tone This is provided when station presses
[TRANS] button during conversation to
transfer the call.
3 CO Dial Tone This is provided to transit CO line if he
accesses CO line which does not provide CO
Dial Tone.
4 DISA Dial Tone This is provided to external caller through
DISA
5 LCR Virtual Tone Reserved
6 Digit Conversion Virtual Tone This is provided when station dials ‘Dummy
Dial-Tone Digit’ in PGM 240.
7 Password Dial Tone This is provided when station dials conference
room number having password.
8 Internal Busy Tone This is provided to external caller through
DID/DISA when he calls the busy station.
9 External Busy Tone This is provided when station makes a
external call to telephone in use.
10 CO Line Busy Tone This is provided to station when there is no
idle CO line.
11 Uncompleted Dial Error Tone This is provided when station does not dial
within inter-digit timer during dialing.
12 DOD Restriction Tone This is provided when station dials the toll
restriction digits.
PGM 290 BTN RANGE DEFAULT
Release 1.0
November 2010