Technical data

CO Call Restriction - PGM 284-285 A-135
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Call Duration Restriction I (PGM 284)
Each tenant has attributes relating Call Duration Restriction (CDR) according to call types (refer
to the following table for a description of the functions, and data entries required).
1. Press the [PGM] button and dial 284.
2. Use the dial pad to enter the desired Tenant range (1-5 for the MBX IP 100, and 1-9 for
MBX IP 300).
3. Press the Flex button for the desired setting (refer to Table).
4. Press the [SAVE] button to store the data entry.
PGM 284 BTN RANGE DEFAULT
NORMAL CO LINE -- Determines call restriction for
Normal CO line.
1 0: No Restriction
1: All Calls
2: Long/ International
3: Internationa
0: No Restriction
DEDICATED LINE -- Determines the call restriction
for TIE line.
2 0: No restriction
1: Restriction
0: No Restriction
LOCAL CALL AFTER R-TIME -- Determines the
operation of Local calls after the Restriction timer
expires.
3 0: Single tone
1: Repeat tone
2: Single tone & Drop
0: Single tone
LONG CALL AFTER R-TIME -- Determines the
operation of Long Distance calls after the Restriction
timer expires.
4 0: Single tone
1: Repeat tone
2: Single tone & Drop
0: Single tone
INTERNAT AFTER R-TIMEDetermines the
operation of International calls after the Restriction
timer expires.
5 0: Single tone
1: Repeat tone
2: Single tone & Drop
0: Single tone
DEDICATED CALL AFTER R-TM -- Determines the
operation of TIE calls after the Restriction timer
expires.
6 0: Single tone
1: Repeat tone
2: Single tone & Drop
0: Single tone
Release 1.0
November 2010