Technical data

Tenant Group Access (PGM 283) A-134
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Tenant Group Access (PGM 283)
Stations in a group are allowed or denied the ability to place intercom/CO calls to Stations in
other groups on a Group-by-group basis.
1. Press the [PGM] button and dial 283.
2. Use the dial pad to enter the desired Tenant number (1-5 for the MBX IP 100, and 199 for
MBX IP 300).
3. Press the Flex button to access/deny tenant.
4. Each Tenant can be programmed to allow or deny call to another tenant.
5. Press the [SAVE] button to store the data entry.
CO Call Restriction - PGM 284-285
The CO Call Time Restriction can be applied differently according to Call types (Local, Long
Distance or International Call) based on each Tenant.
BACKLIGHT USAGE -- This entry allows backlight
option of IP Phone with ring mode.
7 0: All Off
1: Day On
2: Night On
3: Timed On
4: D/N On
5: D/T On
6: N/T On
7: All On
0.All Off
CDR PREFIX UNMATCH -- This entry defines default
Call Duration Restriction type when a called party
number is not matched with prefix table.
8 0: NO CDR
1: Local
2: Long
3: International
4: Dedicate
-
PGM 281 BTN RANGE DEFAULT
Release 1.0
November 2010