Technical data

Tenant Attributes - PGM 280-281 A-132
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Tenant Attributes II (PGM 281)
Each tenant has available attributes relating to tenant name, retry count of ACNR, Wake Up,
Auth etc. (refer to the table below for a description of the functions and the data entries
required).
1. Press the [PGM] button and dial 281.
2. Use the dial pad to enter the desired tenant range (1-5 for the MBX IP 100, and 1-9 for
MBX IP 300).
3. Press the Flex button for the desired setting (refer to Table).
4. Use the dial pad to enter the desired flexible button.
5. Press the [SAVE] button to store the data entry.
PGM 281 BTN RANGE DEFAULT
CONF MEMBER MANUAL ADD -- Determines if
conf-member manual add will be used; when set to
ON, each CONF member can be added using the
CONF button, when set to OFF, each CONF member
will be added automatically.
10: Off
1: On
1: On
REDIAL METHOD -- This entry defines the redial
method when the User presses the [REDIAL] button.
1: One Touch Call - When [REDIAL] button is pressed,
the phone will redial the previously called number.
2: One Touch Log Phone - When [REDIAL] button is
pressed on phone with 3-soft button, redialing can be
initiated, if phone does not have 3-soft button, a redial
list will be displayed.
3: List Dial - When the [REDIAL] button is pressed,
redial list is displayed, and user can select which
number to redial.
2 0: One Touch Dial
1: One Touch Log Phone
2: List Dial
2: List Dial
Release 1.0
November 2010