Technical data

Tenant Attributes - PGM 280-281 A-131
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Tenant Attributes - PGM 280-281
One System can be divided as several systems; each Station and CO line are assigned to a
specific Tenant group.
Tenant Attributes I (PGM 280)
Each tenant has available attributes relating to tenant name, retry count of ACNR, Wake Up,
Auth etc. (refer to the table below for a description of the functions and the data entries
required).
1. Press the [PGM] button and dial 280.
2. Use the dial pad to enter the desired tenant range (1-5 for the MBX IP 100, and 1-9 for
MBX IP 300).
3. Press the Flex button for the desired setting (refer to Table).
4. Use the dial pad to enter the desired flexible button.
5. Press the [SAVE] button to store the data entry.
RING NO ANS TMR -- This entry defines ring no answer
timer. If this timer expires, a call is routed to the forward
destination according to forward type.
8 0-180 (seconds) 0
PROVIDE ANNC-- This entry defines if system answer the
call when a greeting or queuing announcement is provided.
9 0: With Answer
1: W/O Answer
0: With Answer
PGM 280 BTN RANGE DEFAULT
TENANT NAME -- Determines the name of Tenant. 1 Max 24 -
TENANT NAME DISPLAY -- Determines the Tenant name to display. 2 0: Off
1: On
0: Off
TIME TABLE INDEX -- Determines Time Table index of tenant group. 3 1-9 1
ACNR RETRY COUNT -- Determines the ACNR retry count. 4 0-5 3
WAKE UP RETRY COUNT -- Determines the Wake Up retry count. 5 0-5 3
WAKE UP RETRY TIME -- Determines the Wake Up retry time (min). 6 00-20 01
AUTH RETRY COUNT -- Determines the AUTH retry count.
(Reserved)
70-5 3
MULTI-CALL FORWARD SVC COUNT -- determines the Multi-Call
forward count.
8 01-10 05
PGM 277 BTN RANGE DEFAULT
Release 1.0
November 2010