Technical data

Attendant Group - PGM 270-272 A-124
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Attendant Group Attributes (PGM 272)
Each attendant group has available attributes relating to announcements, timers, forward, etc.
The table below provides descriptions for the attributes and dthe ata entries required.
1. Press the [PGM] button and dial 272.
2. Use the dial pad to enter the desired tenant number (1-5 for the MBX IP 100, and 1-9 for
MBX IP 300).
3. Press the Flex button for the desired attribute; refer to the Table
SECOND Q. TYPE -- This entry defines the type of second
queuing tone.
14 1: Normal
2: Prompt
3: Annc
4: INT MOH
5: EXT MOH
6: VMIB MOH1
7: VMIB MOH2
8: VMIB MOH3
9: VMIB MOH4
10: SLT MOH1
11: SLT MOH2
12: SLT MOH3
13: SLT MOH4
14: SLT MOH5
4: INT MOH
SECOND Q. TIMER -- This entry defines the timer for
forward destination.
15 000-300 (seconds) 30
SECOND TONE NO -- This entry defines second queuing
tone number in case queuing type is normal.
16 01-19 Not Asg
SECOND PRT ANNCThis entry defines second queuing
prompt / annc.Number in case queuing type is
PROMPT/ANNC.
17 001-255 Not Asg
SECOND REPEAT NO -- This entry defines second queuing
repeat number.
18 000-100 3
SECOND RPT DELAY -- This entry defines the pause timer
before second queuing repeat.
19 000-100 (seconds) 0
SECOND CCR -- This entry defines CCR option during
second queuing announcement is provided.
20 0-1 0
PGM 271 BTN RANGE DEFAULT
Release 1.0
November 2010