Technical data

Attendant Group - PGM 270-272 A-122
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Attendant Group Greeting/Queuing (PGM 271)
Each attendant group has available attributes relating to the greeting and queuing
announcements, time. The following table provides descriptions for the attributes and the data
entries required.
1. Press the [PGM] button and dial 271.
2. Use the dial pad to enter the desired tenant number (1-5 for the MBX IP 100, and 1-9 for
MBX IP 300).
3. Press the Flex button for the desired attribute, refer to Table.
4. Use the dial pad to enter the desired attendant group attributes data, refer to the Table.
5. Press the [SAVE] button to store the data entered.
PGM 271 BTN RANGE DEFAULT
GREETING TYPE -- Determines the type of Greeting Tone
to be used.
1 1: Normal
2: Prompt
3: Annc
4: INT MOH
5: EXT MOH
6: VMIB MOH1
7: VMIB MOH2
8: VMIB MOH3
9: VMIB MOH4
10:SLT MOH1
11:SLT MOH2
12:SLT MOH3
13:SLT MOH4
14:SLT MOH5
1: Normal
GREETING PLAY -- Determines the Greeting Play time. 2 000-180 (sec) 000
GREETING TONE NO --- Determines the Greeting Tone
number when greeting type is set to Normal.
3 01-19 04
GREETING PROMPT/ANNC -- Determines the Greeting
Prompt/ Announce Number when Greeting Type is set to
Prompt or Announce.
4 001-255 Not Asg
GREETING REPEAT NO -- Determines the number of times
the Greeting will repeat.
5 000-100 3
GREETING RPT DELAY -- Determines the length of time the
timer will pause before the greeting is repeated.
6 000-100 (seconds) 0
Release 1.0
November 2010