Technical data

Ring Freq/Cadence Table (PGM 266) A-119
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Ring Freq/Cadence Table (PGM 266)
Voice Mail Dialing Table (PGM 269)
When an external Voice Mail system is used that employs in-band signaling, a digit sequence
must be defined for the system to signal various call characteristics to the Voice Mail system.
The voice mail uses the sequences to determine appropriate announcements or further call
routing. The Table permits the definition of digits as either a prefix or suffix to other digits
(station number for mailbox identification). Sequences are defined for such call characteristics
as Put Mail, Get Mail, No Answer call, etc.
1. Press the [PGM] button and dial 269.
2. Use the dial pad to enter a Table entry (1-9), refer to Table.
3. Use the dial pad to select Prefix or Suffix and the digit sequence, use the [MSG/CALLBK]
button to enter a Pause, refer to the Table.
4. Press the [SAVE] button to store the data entered.
INDEX FREQUENCY CADENCE REPEAT
FREQ 1 FREQ 2
01 1000 1020 200 ms ON / 200 ms OFF 255 (Cont.)
02 1000 1020 400 ms ON / 2 sec OFF 255 (Cont.)
03 1000 1020 400 ms ON / 600 ms OFF 255 (Cont.)
04 1000 1020 1 sec ON 1
05 1000 1020 800 ms ON / 2400 ms OFF 255 (Cont.)
06 890 910 800 ms ON / 2400 ms OFF 255 (Cont.)
07 1260 1280 800 ms ON / 2400 ms OFF 255 (Cont.)
08 800 820 800 ms ON / 2400 ms OFF 255(Cont.)
09 1000 1020 400 ms ON / 400 ms OFF / 400 ms ON / 2 sec OFF 255(Cont.)
10 890 910 400 ms ON / 400 ms OFF / 400 ms ON / 2 sec OFF 255(Cont.)
11 1260 1280 400 ms ON / 400 ms OFF / 400 ms ON / 2 sec OFF 255(Cont.)
12 800 820 400 ms ON / 400 ms OFF / 400 ms ON / 2 sec OFF 255(Cont.)
13 1000 1020 200 ms ON / 200 ms OFF 255(Cont.)
14 1000 1020 400 ms ON / 400 ms OFF 255(Cont.)
15 1000 1260 300 ms ON / 300 ms OFF 255(Cont.)
Release 1.0
November 2010