Technical data

Time Table Attributes (PGM 253) A-110
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Time Table Attributes (PGM 253)
The system can automatically select the Ring and COS Mode based on the system time table.
Three Ring and COS modes are supported: Day, Night, and Timed modes.
Each Time Table has a ring mode relating to the different ring assignments, COS, and
answering method for the system. The ring mode can be controlled automatically through
definitions in the Auto Ring Mode & weekly timetable based on the Time Table. The Attendant
may change the system mode selection from automatic to manual. Refer to the following table
for a description of the funtions, the LCD displays and date entries required.
1. Press the [PGM] button and dial 253.
2. Use the dial pad to enter the desired Table range.
3. Press the Flex button for the desired setting; refer to the following Table.
4. Use the dial pad to enter the desired flexible button.
5. Press the [SAVE] button to store the data entry.
PGM 253 BTN RANGE DEFAULT
TIME ZONE COMMENT-- defines the comment of the Time
Table.
1 32 characters none
SYSTEM TIME ZONE -- defines the Time Zone of the Time Table 2 0-73 0: Sys Time
DAYLIGHT SAVINGS -- defines Daylight Saving Time of Time
Table.
3On/Off Off
RING MODE -- defines the ring mode of Time Table. 4 0: Day
1: Night
2: Timed
0:Day
AUTO RING MODE -- defines the Auto Ring mode of the Time
Table.
5 On/Off Off
Release 1.0
November 2010