Technical data

TABLES DATA - PGM 250-269 A-106
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
4. Press the desired Flex button to toggle access.
- LED ON: access allowed, LED OFF: access not allowed.
5. Press the [SAVE] button to store the data entry
TABLES DATA - PGM 250-269
Toll Tables (PGM 250)
Based on Table entries, Stations or DISA users are allowed or denied dialing specified
numbers. The following rules apply to establishing restrictions based on the Table entries:
- If entries are only made in the Allow Table, only those numbers entered can be dialed,
all other dialed numbers will be restricted.
- If entries are only made in the Deny Table, only those numbers entered will be
restricted and all other numbers can be dialed.
- When there are entries in both the Allow and Deny Table pair, if the number is in the
Deny Table, the number will be restricted otherwise the number can be dialed without
restriction.
COS values from 2 to 15 have an Allow and a Deny entry in the Toll Table. For each Table, there
can be up to 100 separate Allow and Deny entries of up to 16 digits. Entries in the Tables can
be any digit (0-9), "*", "#".
Each of the entries have an option to be applied or not for each tenant group.
1. Press the [PGM] button and dial 250.
2. Press Flex button 1-2:
- Flex 1: Allow Table
- Flex 2: Deny Table
3. Use the dial pad to select a bin number (001-100).
4. Press Flex button 1-2:
- Flex 1: Digit
- Flex 2: Tenant group apply option
5. Use the dial pad to enter the dialed number desired (up to 16 digits).
(To delete a Toll Table entry, press the [SPEED] button.)
6. Press the [SAVE] button to store the data entry.
7. Use the Flex buttons to apply at the tenant group or not. If LED is turned on, the entry is
applied to the tenant group.
Release 1.0
November 2010