Technical data

Dummy Dial Tone Digit (PGM 240) A-104
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
Dummy Dial Tone Digit (PGM 240)
When digit conversion is programmed, the CO line is seized after digit conversion is completed.
When programmed, in the event a user cannot obtain the CO dial tone from PX, a dummy dial
tone can be provided.
1. Press the [PGM] button and dial 240.
2. Dial bin no.
3. Used the dial pad to enter desired data.
4. Press the [SAVE] button to store the data entry
Executive/Secretary Assign (PGM 241)
Stations can be grouped as Executive/Secretary so that when the Executive enters DND,
intercom and transferred calls are automatically routed to the Secretary. An Executive may
have up to 3 Secretaries. A Secretary can be assigned to multiple Executives. The Secretary
of one pair may be the Executive of another however, assignments that form a loop-back are
not allowed.
1. Press the [PGM] button and dial 241.
2. Use the dial pad to enter the desired Executive/Secretary pair bin.
3. Press the desired Flex button, refer to the following Table.
4. Press the [SAVE] button to store the data entry.
PGM 240 BTN RANGE DEFAULT
DUMMY DIAL-TONE DGT -- Dummy Dial tone digits. - Max 6 digits
(0-9, *, #, X)
-
PGM 241 BTN RANGE DEFAULT
EXECUTIVE NUMBER -- Assigns Executive station. 1 - -
SECRETARY ASSIGN -- Assigns Secretary stations; enter
secretary station range, or press FLEX 1-3 and enter station
number to assign.
2 FLEX 1-3 -
Release 1.0
November 2010