Technical data

One Digit Service Attributes (PGM 237) A-103
Appendix A: System Programming Tables
MBX IP Description / Operations & Programming Guide
One Digit Service Attributes (PGM 237)
When performing a call transfer from a mobile extension, the flash digit and input timer can be
assigned.
1. Press the [PGM] button and dial 237.
2. Press the desired Flex button, refer to the following Table.
3. Used the dial pad to enter desired data.
4. Press the [SAVE] button to store the data entry
PGM 236 BTN RANGE DEFAULT
FLASH DIGIT -- The flash digit from mobile extension. 1 Max 2 digits *
INPUT TIMER -- The inter-digit timer of the mobile flash digit
(2 sec).
1 01-20 (seconds) 05
PGM 237 BTN RANGE DEFAULT
STEP CALL -- determines if Step Call is enabled or disabled. 1 0: Disable
1: Enable
Disable
DIGIT 1 -- when accessing a busy tone, User may dial for one of
the one-touch services.
2
0: N/A
1: Call-Back
2: Camp On
3: Call Wait
4: Voice Over
5: Intrusion
6: Hunt
0: N/A
DIGIT 2 -- 3
DIGIT 3 -- 4
DIGIT 4 -- 5
DIGIT 5 -- 6
DIGIT 6 -- 7
DIGIT 7 -- 8
DIGIT 8 -- 9
DIGIT 9 -- 10
DIGIT 0 -- 11
DIGIT * -- 12 Call Wait
DIGIT # -- 13 Voice-Over
Release 1.0
November 2010